6 V6-3.0L DOHC (2003)
NOTE: Perform the following test only when directed.
1. Complete the "BEFORE REPAIR PROCEDURE". (See BEFORE REPAIR PROCEDURE.)
2. Disconnect the negative battery cable.
3. Remove the battery and battery tray.
CAUTION: The quick release connector may be damaged if the tab is bent excessively. Do not expand the tab over the stopper.
4. Disconnect the quick release connector from the fuel tank as follows:
1. Push the tab on the locking coupler 90° until it stops.
2. Pull the fuel hose straight back.
NOTE:
-
The stopper may be removed from the quick connector. Take care not to lose it. Reinstall it to the quick release connector before
reconnecting the fuel line.
-
The locking coupler has two internal locking tabs which retain the pulsation damper pipe. Be sure that the tab on the locking coupler is
rotated until it stops to release two internal locking tabs.
5. Cover the disconnected quick release connector with vinyl sheet or the like to prevent it from being scratched or contaminated with foreign
material.
