6 V6-3.0L DOHC (2003)
19.
Remove four (4) steering column nuts.
20.
Remove steering column.
21.
After loosening dashboard assembly and disconnecting all necessary connectors, gently pull passenger side of dashboard away to access top of
heater box.
22.
Remove and discard Small Foam Seal from top/center of heater box.
NOTE:
DO NOT remove other foam seals around edges of heater box.
23.
Remove and discard screen from top of heater box.
NOTE:
Screen is no longer needed and will not be replaced.
CAUTION:
Be careful not to allow screen material to fall into heater box during screen removal. During screen removal, some portions of foam seal
(around edges) may pull away from heater box.
24.
Firmly press down around entire foam seal to ensure a tight seal.
