6 V6-3.0L DOHC (2003)
![background image](/mazda/6/v6-3.0l_dohc/Page-2098002.png)
3.
Grasp plastic tab and rotate 1/4 turn counterclockwise.
4.
Pull turn signal bulb socket assembly outward and remove from headlamp assembly.
NOTE:
Turn signal bulb socket has an "air tight" fit. It may require extra effort to pull socket assembly outward.
CAUTION:
Avoid touching light bulb with bare hands. Oil from hands and fingers may reduce bulb durability.
5.
Obtain two (2) 1/8" x 5/16" silicon spacers supplied in the kit.
NOTE:
A silicon spacer will be inserted under both electrical terminals on turn signal bulb socket housing to keep tension on terminals.