6 V6-3.0L DOHC (2003)
There are four (4) grooves on the fuel line. Make sure to use the smaller grooves.
59.
Reinstall the green fuel line retainer clip.
NOTE:
^
Position the clip so the tab is pointing towards the fuel line hose.
^
Align the lock tab to the fuel line openings and install the retainer clip.
60.
Reinsert the fuel line into the fuel pump coupler by snapping it into the coupler until a "click" noise is heard.
NOTE:
To ensure that the fuel line is fully secure into the fuel pump coupler, slightly tug on the fuel line.
61.
Reconnect the gray and black connectors.
62.
Reconnect the negative battery cable.
63.
Crank the engine until it starts and ensure there is no fuel leakage at the fuel line.
64.
Turn the engine off.
65.
Turn the ignition to the "ON" position and check the fuel gauge.
^
If the fuel gauge reads between 1/4 and 1/2, proceed to Step 67.
^
If the fuel gauge reads less than 1/4, make a note of the amount and proceed to the next step.
