6 V6-3.0L DOHC (2003)
NOTE:
^
The files above are already on the B25.0 CD and are no longer available on the ESI WDS calibration web site.
^
You will need to update the PTU first, then install the needed calibration file that WDS shows during PCM reprogramming. Go to "WDS
Calibration" on ESI and download the "update" file. If the PTU is not updated to the latest level, the calibration file will not install into the
PTU.
2.
Install revised PCM calibration sticker (9999-95-AMDC-97) above the tear tag label (driver's side A-pillar door jamb) with the calibration P/N
provided in the table above.
3.
Road test the vehicle to relearn the "Keep Alive Memory" (KAM) strategy.
4.
Verify repair.
C.
AUTHORIZED MODIFICATION LABEL INSTALLATION
Complete an "Authorized Modification Label" with the RECALL number written on the sticker and affix it to the vehicle's bulkhead. Refer back to the
illustration under "A. VEHICLE INSPECTION PROCEDURE."
