6 V6-3.0L DOHC (2003)
12.
Install intermediate harness bracket at bottom of fuse box installed location.
13.
Reinstall air cleaner.
14.
Reconnect air flow sensor connector.
15.
(3.0L Engine Only): Reconnect VAD three-way solenoid connector.
16.
2003 - 2005 Mazda6: Proceed to "Fuel Pump Relay Kit Installation Procedure" and install Fuel Pump Relay Kit.
2006 - 2007 Mazda6: Proceed to next step.
17.
Reconnect negative battery cable.
18.
Re-enter customer's pre-seat radio stations.
^
2006 - 2007 Mazda6: Proceed to "Power Window Initialization Procedure" to restore "anti-pinch" and "auto open/close" window features
before returning vehicle to customer or dealer inventory.
Fuel Pump Relay Kit Installation Procedure (2003 - 2005 Mazda6 Only):
19.
Secure intermediate harness bracket together with PCM installation bracket.
20.
Tie-wrap intermediate harness and harness together at three locations. Make sure intermediate harness passes over main relay bracket.
21.
Disconnect fuel pump relay from relay box, and connect intermediate harness to fuel pump relay connector.
22.
Connect ground terminal on body panel with existing M8 screw.
23.
Reconnect negative battery cable.
