6 V6-3.0L DOHC (2003)
2. Secure the curtain air bag module in a vise, and cut off the deployment section, as shown in the figure.
WARNING: Be sure not to collapse the pipe on the side where it is cut. If it is collapsed, the interior pressure of the pipe will build up
and can cause it to explode during air bag module deployment.
3. Tie the side air bag module to the tire with the module facing the center of the tire. Wrap the wire through the tire and around the bracket at least
four times.
WARNING: If the air bag module is not properly installed to the tire, serious injury may occur when the module is deployed. When
installing the air bag module to the tire, make sure the module is facing the downward.
4. Connect the SST (Adapter harness) to the curtain air bag module as shown in the figure.
