6 V6-3.0L DOHC (2003)
Battery: Technical Service Bulletins
Electrical - Battery Testing Procedures
Bulletin No: 01-054/10
Last Issued: 12/13/2010
Subject
BATTERY TEST PROCEDURE REQUIREMENTS USING THE GR8-1291
APPLICABLE MODEL(S)/VINS
DESCRIPTION
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary
battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
NOTE:
A Warranty Code is required for warranty claim submission
Battery Identification (Mazda batteries have 2 rating types)
1. JIS (Japanese Industrial Standard):
JIS codes are six-digit alpha-numeric markings molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery
terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery.
NOTE:
Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. 2. CCA (Cold Cranking Amps):
CCA ratings are normally located on a sticker affixed to the top of the battery to indicate a battery's Cold Cranking Amps. CCA rated batteries are
supplied with domestically produced vehicles.
NOTE:
If an incorrect CCA rating is entered into the Mazda GR8-1291, it will result in a false result and invalid Warranty Code from the tester. This will also
result in unnecessary replacement of batteries.
TEST PROCEDURE
