mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Steering - Drift/Pull Diagnostics|Page 5519 > < Steering - Drift/Pull Diagnostics
Page 2
background image

-

If vehicle does pull/drift according to Pull/Drift Specifications, proceed to next step.

2.

Check tire pressure.

-

If tire pressure is too low or too high, correct tire pressure as needed; test drive vehicle.

-

If tire pressure is correct, proceed to next step.

3.

Check power steering effort.

-

If power steering effort is uneven, replace power steering rack; test drive vehicle.

-

If power steering effort is okay, proceed to next step.

4.

Verify steering wheel centering.

-

If steering wheel is off-center, realign steering wheel.

-

If steering wheel is not off-center and vehicle is produced before April 5, 2004, proceed to "A. STRUT MOUNT KIT INSTALLATION".

-

If steering wheel is not off-center and vehicle is produced after April 5, 2004, proceed to "B. 4-WHEEL ALIGNMENT".

NOTE:

Vehicles produced after April 5, 2004 already have the STRUT MOUNT KIT INSTALLED, so it is not necessary to install it.

PART(S) INFORMATION

Steering - Drift/Pull Diagnostics|Page 5519 > < Steering - Drift/Pull Diagnostics