6 V6-3.0L DOHC (2003)
^
Clean the upper rubber spring seat.
6.
Install the (large) coil spring insulator onto the bottom of the coil spring.
NOTE:
Be sure to leave 1/8" of insulation beyond the end of the coil.
7.
Install the (small) coil spring insulator onto the second coil extending 1" beyond the end of the top coil.
8.
Reassemble the front shock absorber and coil spring assembly according the Workshop Manual (Section 02-13) FRONT SHOCK ABSORBER
AND SPRING REMOVAL/INSTALLATION.
NOTE:
Do not use any grease or lubrication on the new rubber insulators, rubber spring seat, or any portion of the coil spring assembly.
9.
Repeat Steps 2 - 8 on the other side front coil spring assembly.
10.
Verily repair.