6 V6-3.0L DOHC (2003)
Pressure Plate: Testing and Inspection
CLUTCH COVER INSPECTION
1. Measure the wear of the diaphragm spring fingers.
^
If not as specified, replace the clutch cover.
Depth 0.6 mm (0.024 inch) max.
2. Measure the flatness of the pressure plate with a straight edge and a feeler gauge.
^
If not as specified, replace the clutch cover.
Clearance 0.3 mm (0.012 inch) .
3. When checking the diaphragm spring fingers, mount a dial indicator on the cylinder block.
4. Rotate the flywheel and check for misaligned diaphragm spring fingers.
^
If not as specified, replace the clutch cover.
Misalignment 0.6 mm (0.024 inch) max.
