6 V6-3.7L (2009)
Keyless Entry Receiver: Component Tests and General Diagnostics
Keyless Receiver Inspection [Keyless Entry System]
KEYLESS RECEIVER INSPECTION [KEYLESS ENTRY SYSTEM]
1. Remove the glove compartment. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair
2. Measure the voltage according to the terminal voltage table.
-
If the voltages cannot be verified as indicated in the terminal voltage table, inspect the parts under "Inspection item (s)".
-
If the system does not work normally even though the parts or related wiring harnesses do not have any malfunction, replace the keyless
receiver.
3. Disconnect the negative battery cable.
Terminal Voltage Table (Reference)
Terminal Voltage Table (Reference)
Keyless Receiver Inspection [Advanced Keyless Entry And Push Button Start System]
KEYLESS RECEIVER INSPECTION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]
1. Remove the glove compartment. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair
2. Measure the voltage according to the terminal voltage table.
-
If the voltages cannot be verified as indicated in the terminal voltage table, inspect the parts under "Inspection item (s)".
-
If the system does not work normally even though the parts or related wiring harnesses do not have any malfunction, replace the keyless
receiver.
3. Disconnect the negative battery cable.
Terminal Voltage Table (Reference)
