6 V6-3.7L (2009)
Amplifier: Service and Repair
AUDIO AMPLIFIER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Front scuff plate (RH) See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate Removal/Installation
b. Front side trim (RH) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Front Side Trim Removal/Installation
c. Glove compartment See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.