6 V6-3.7L (2009)
Resistance
-
0.9-1.1 ohms
Rear Speaker Inspection
REAR SPEAKER INSPECTION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. High-mount brake light (See See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair)
b. Rear seat cushion (See See: Body and Frame/Seats/Service and Repair/Overhaul/Rear Seat/Rear Seat Cushion Removal/Installation)
c. Rear side seat back See: Body and Frame/Seats/Service and Repair/Overhaul/Rear Seat/Rear Side Seat Back Removal/Installation
d. C-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/C-Pillar Trim Removal/Installation
e. Rear package trim See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair
f.
Rear speaker See: Service and Repair/Rear Speaker Removal/Installation
3. Verify the resistance between the rear speaker terminals.
-
If not within the specification, replace the rear speaker.
Resistance
-
2.24-3.96 ohms
Front Door Speaker Inspection
FRONT DOOR SPEAKER INSPECTION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Inner Garnish Removal/Installation
3. Remove the front door trim. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Front Door Trim Removal/Installation
4. Remove the front door speaker. See: Service and Repair/Front Door Speaker Removal/Installation
5. Verify the resistance between the front door speaker terminals.
