6 V6-3.7L (2009)
Body Control Module: Component Tests and General Diagnostics
BODY CONTROL MODULE (BCM) INSPECTION
1. Remove the front scuff plate. (driver-side) See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate Removal/Installation
2. Remove the front side trim. (driver-side) See: Interior Moulding / Trim/Trim Panel/Service and Repair/Front Side Trim Removal/Installation
3. Remove the BCM with the connector connected. See: Service and Repair
4. Measure the voltage at each terminal is as indicated in the Terminal Voltage Tables.
-
If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item (s)".
-
If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the BCM.
Terminal Voltage Table (Reference)
