6 V6-3.7L (2009)
4. Remove inner cable (A) and knob cable (B) from case.
5. Install pad (A) from end of both inner cable and knob cable.
NOTE:
Install the pad 8mm from the caps (B) on the end of cable.
6. Attach end of inner cable to lever.
NOTE:
Inner cable is directional.
-
On right door latch, make sure to install as the groove (B) on the end of inner cable can be seen.
-
On left door latch, make sure to install as the groove (A) on the end of inner cable cannot be seen.