6 V6-3.7L (2009)
Cowl Moulding / Trim: Service and Repair
Cowl Grille Removal/Installation
COWL GRILLE REMOVAL/INSTALLATION
1. Remove the windshield wiper arm and blade. (See See: Wiper and Washer Systems/Wiper Arm/Service and Repair)
2. Remove the fastener A.
3. Pull the front fender molding in the direction of the arrow shown in the figure and remove it while remove the tab B and tab C.
4. Disconnect the windshield washer hose from the joint pipe A. (See See: Wiper and Washer Systems/Windshield Washer Hose/Service and Repair)
5. Remove the fasteners D.
6. Pull the cowl grille in the direction of arrow (1) so that it is free from the pins E, pull tabs F in the direction of arrow (2).
