6 V6-3.7L (2009)
2.
Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect the vehicle for a Campaign Label MSP20 attached to the vehicle's
hood. Refer to eMDCS System - Warranty Vehicle Inquiry Results table above.
NOTE:
Verify the campaign number as the vehicle may have multiple labels.
REPAIR PROCEDURE
1.
Remove glove box assembly according to Workshop Manual (section 09-17 GLOVE COMPARTMENT REMOVAL/INSTALLATION).
2.
Inspect glove box for "ribs" around stops.
-
If ribs are present around stops, glove box is modified; no repair is necessary. Proceed to "CAMPAIGN LABEL INSTALLATION".
