6 V6-3.7L (2009)
Scuff Plate: Service and Repair
Rear Scuff Plate Removal/Installation
REAR SCUFF PLATE REMOVAL/INSTALLATION
1. Remove the rear seat cushion. See: Seats/Service and Repair/Overhaul/Rear Seat/Rear Seat Cushion Removal/Installation
2. Remove the fastener A.
3. Detach tab B while pulling the rear scuff plate in the direction of the arrow (1) shown in the figure, then detach tab C, pin D, E, clip F and G while
pulling in the direction of the arrow (2).
4. Install in the reverse order of removal.
