6 V6-3.7L (2009)
Trim Panel: Service and Repair
Side Panel Removal/Installation
SIDE PANEL REMOVAL/INSTALLATION
1. Pull the side panel in the direction of the arrow in the order of (1) and (2), then remove it while detaching the clips A, B, C and guide.
2. Install in the reverse order of removal.
A-Pillar Trim Removal/Installation
A-PILLAR TRIM REMOVAL/INSTALLATION
1. Partially peel back the seaming welt.
2. Pull the upper end of the A-pillar trim in the direction of the arrow shown in the figure and remove clips A, B and C.
CAUTION:
-
When pulling out the A-pillar trim, be careful not to damage the tabs.
3. When installing the A-pillar, Install the new clip A to the A-pillar trim in advance.
4. Install in the reverse order of removal.