6 V6-3.7L (2009)
Terminal Voltage Table (Reference) (Part 4)
*1
MTX
*2
ATX
Generated pulse (reference)
-
Terminal: 3P (+) -> body ground (-)
-
Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range
Keyless Beeper Inspection [Advanced Keyless Entry And Push Button Start System]
KEYLESS BEEPER INSPECTION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]
1. Disconnect the negative battery cable.
2. Remove the keyless beeper. See: Service and Repair/Keyless Beeper Removal/Installation [Advanced Keyless Entry And Push Button Start
System]
3. Apply battery positive voltage and connect the ground to each terminal and verify the keyless beeper sound operation.
-
If the beep sound cannot be verified, replace the keyless beeper.
