6 V6-3.7L (2009)
Seat Heater Switch: Testing and Inspection
SEAT WARMER SWITCH INSPECTION
1. Inspect for continuity between the seat warmer switch terminal J, and connect terminal H using an ohmmeter.
-
If not as specified, replace the seat warmer switch.
2. Apply battery voltage to seat warmer switch terminal J, and connect terminal B to ground.
3. Seat warmer switch to Lo or Hi position.
4. Verify that the LED illuminates.
-
If there is any malfunction, replace the seat warmer switch.
5. Apply battery voltage to seat warmer switch terminal F, and connect terminal D to ground.
6. Verify that the LED illuminates.
-
If there is any malfunction, replace the seat warmer switch.
