mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Interior - Front Seat Clunk Noise While Braking|Page 8130 > < Interior - Driver's Seat Chatters/Seat Lift Inoperative|Page 8125
Page 1
background image

Seat Track: All Technical Service Bulletins
Interior - Front Seat Clunk Noise While Braking

Bulletin No: 09-060/09

Last Issued: 10/23/2009

Subject:
CLUNK NOISE FROM SEAT WHEN BRAKING

APPLICABLE MODEL(S) / VINS
2006-2010 MX-5
2004-2010 RX-8
2004-2010 MAZDA3
2006-2010 MAZDA5
2003-2010 MAZDA6
2007-2010 CX-7
2007-2010 CX-9

DESCRIPTION

Some vehicles may exhibit a clunk noise coming from the front seat when braking. The noise may be caused by both seat rails (A) being out of position.

Customers having these concerns should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer complaint.

2. Loosen the seat assembly according to the appropriate MS3 online instructions or Workshop Manual.

3. Insert both left and right locator pins (B) (front side) into the floor.

NOTE:

Interior - Front Seat Clunk Noise While Braking|Page 8130 > < Interior - Driver's Seat Chatters/Seat Lift Inoperative|Page 8125