6 V6-3.7L (2009)
The side cover does not have to be removed completely, just release the front portion from the seat.
6. Replace the guide cam and spring with modified ones.
a. Remove the spring and pull the guide cam outward to remove it from the shaft.
NOTE:
Perform the repair through the opening in the side cover.
b. Apply grease to the guide cam shaft and the contact surfaces of the guide cam and lock plate hook by reusing grease from the old part.
c. Replace the guide cam and spring with the modified ones.
7. Reinstall the lift lever.
a. Hold the moving part of the lock plate with finger, then flip up the hook.
b. Align the notch on the lift lever with the spring location on the lifter, then insert.
c. Release finger from the moving part of the lock plate, then flip down the hook and allow it to engage with the gear.
d. Make sure that the hook (convex) of the lock plate is fitted into the guide cam (concave).
