mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Front Door Key Cylinder Switch Inspection|Page 8139 > < Front Door Key Cylinder Switch Inspection|Page 8137
Page 2
background image

-

If not as indicated in the table, replace the front door latch and lock actuator.

Rear Door Lock-link Inspection

1. Fully open the rear door glass.

2. Disconnect the negative battery cable.

3. Remove the following parts: 

a. Inner garnish  See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and Replacement/Inner Garnish

Removal/Installation

b. Rear door trim  See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Removal and Replacement

c. Rear inner handle  See: Doors, Hood and Trunk/Doors/Front Door/Front Door Handle/Front Door Interior Handle/Service and Repair

d. Rear door speaker  See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair/Rear Door

Speaker Removal/Installation

e. Rear door quarter glass  See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Window Glass/Service and Repair/Rear Door Quarter

Glass Removal/Installation

f.

Rear door glass  See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Window Glass/Service and Repair/Rear Door Glass
Removal/Installation

g. Rear door module panel  See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door Module Panel Removal/Installation

h. Rear door latch and lock actuator  See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Latch/Service and Repair

4. If the door lock condition is to be inspected, pull the door lock-link switch cable, or press it in.

NOTE:
-

The door lock-link switch cable locks or unlocks only when the latch lever is locked.

Front Door Key Cylinder Switch Inspection|Page 8139 > < Front Door Key Cylinder Switch Inspection|Page 8137