6 V6-3.7L (2009)
Brake Pad: Service and Repair
Disc Pad (Front) Replacement
DISC PAD (FRONT) REPLACEMENT
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, depress the pedal a few times, rotate the wheel by hand, and verify that the brake does not drag.
Shim, Disc Pad Installation Note
CAUTION:
-
If the shim and disc pad installation position/direction is incorrect, it could result in noise occurrence. Therefore make sure the installation
position/direction is correct.
1. Push the piston fully inward using the SST.