6 V6-3.7L (2009)
2. Apply grease supplied with a new shim to the contact surface of the inner shim and disc pad, and to the contact surface of the outer shim and inner
shim only when replacing the shim.
3. Apply grease supplied with a new disc pad to the area that contacts the guide plate only when replacing the disc pad.
4. Install the shim and disc pad to the mounting support as shown in the figure.
NOTE:
-
Install the disc pad so that the side with the bigger notch points toward the vehicle's top.
-
For a disc pad with a pad wear indicator, install it to the vehicle's inner side with the pad wear indicator pointing toward the vehicle's top.
