6 V6-3.7L (2009)
Brake Master Cylinder: Service and Repair
MASTER CYLINDER REMOVAL/INSTALLATION
CAUTION:
-
When removing/installing the master cylinder, avoid touching the primary piston with your hand when not necessary. Otherwise, it could damage
the master cylinder.
1. Remove the battery and battery tray. (MZI-3.7) See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Add brake fluid, bleed the brakes, and inspect for leakage after the installation has been completed. See: Brake Bleeding/Service and Repair
L5
MZI-3.7