6 V6-3.7L (2009)
Traction Control Switch: Component Tests and General Diagnostics
DSC OFF SWITCH INSPECTION
1. Remove the DSC OFF switch. See: Service and Repair/DSC Off Switch Removal/Installation
2. Verify that the continuity between the DSC OFF switch terminals is as indicated in the table.
-
If not as indicated in the table, replace the DSC OFF switch.
3. Apply battery voltage to DSC OFF switch terminal E, and connect terminal A to ground.
4. Verify that the LED illuminates.
-
If there is any malfunction, replace the DSC OFF switch.
