6 V6-3.7L (2009)
14. Remove the OCV component (LH) (RH). See: Timing Components/Timing Chain/Service and Repair
15. Remove in the order indicated in the table.
16. Install in the reverse order of removal.
17. Start the engine and:
a. Inspect the runout and contact on the pulley and belt.
b. Inspect for engine oil, engine coolant, ATF, power steering fluid and fuel leakage.
c. Verify the ignition timing, idle speed and idle mixture. See: Tune-up and Engine Performance Checks/Service and Repair
d. Engine accessories operation.
18. Perform a road test.