6 V6-3.7L (2009)
9. Put a wrench to the position shown in the figure on the RH bank camshaft, rotate the RH bank camshaft counterclockwise, and set the camshaft to
the neutral position.
NOTE:
-
The cylinder head and the camshaft bearing caps are numbered to make sure they are reassembled in their original position. When removed, keep
the bearing caps with the cylinder head they were removed from. Do not mix the caps.
10. Loosen the RH bank camshaft cap bolts in several passes in the order shown in the figure and remove the camshaft cap.
11. Remove the camshaft, camshaft sprocket, camshaft timing chain, and camshaft timing chain tensioner of the RH bank as a single unit.
Cylinder Head Removal Note
1. Loosen the cylinder head bolts in several passes in the order shown.
