6 V6-3.7L (2009)
b. Position the camshafts onto the cylinder head (LH) in the neutral position as shown.
c. Install the LH bank camshaft caps and temporarily tighten the camshaft cap bolts evenly in the order shown in several passes.
Tightening torque
-
9-11 Nm {92-112 kgf-cm, 80-97 in-lbf}
d. Remove the retaining wire inserted into the camshaft timing chain tensioner (LH).
4. Turn the crankshaft clockwise so that the crankshaft keyway is in the 11 o'clock position. (This will position the No.1 cylinder at TDC.)
