6 V6-3.7L (2009)
1. Turn the crankshaft clockwise so that the crankshaft keyway is in the 11 o'clock position. (This will position the No.1 cylinder at TDC.)
NOTE:
-
Verify that there are timing marks in three locations (Yellow 1, Black 2) on the timing chain. If any timing marks are missing, mark the timing
chain.
-
When marking the crankshaft sprocket side timing chain, change the mark color.
-
When the timing chain is replaced with a new one, mark the new timing chain at the same positions as the removed timing chain.
2. Mark the timing chain at the position of each timing sprocket timing mark.
3. Remove the timing chain in the following order.
a. Chain tensioner
b. Timing chain
c. Tensioner arm
d. Chain guide
e. Crankshaft sprocket
Timing Chain Component Installation Note
