6 V6-3.7L (2009)
a. Tighten the handle and hold the SST (49 0839 425C) in the direction arrows shown in the figure.
CAUTION:
-
Be careful that the SST (49 0839 425C) tabs do not hang over the stator.
NOTE:
-
Taping on the nail for protect to damage.
A/C Compressor Pulley Installation Note
CAUTION:
-
If the SST is not properly positioned when the A/C compressor pulley is press-fit, the A/C compressor axle will interfere with the SST, possibly
damaging component parts. Verify the SST and axle are properly positioned and perform the procedure very carefully.
1. Install the inner wheel of the pulley using a press and SST(49 B034 212) to the compressor.
