Mazda Workshop Service and Repair Manuals > 6 V6-3.7L (2009) > Instrument Panel, Gauges and Warning Indicators | Driver/Vehicle Information Display | Component Information | Service and Repair | Info Switch Removal/Installation

Page 1

Driver/Vehicle Information Display: Service and Repair
Information Display Removal/Installation

INFORMATION DISPLAY REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the center panel upper. See: Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Center Panel Upper

Removal/Installation

3. Remove the screws, then remove the information display from the center panel upper.

4. Install in the reverse order of removal.

Mazda Workshop Service and Repair Manuals