6 V6-3.7L (2009)
Fog/Driving Lamp Switch: Testing and Inspection
FRONT FOG LIGHT SWITCH INSPECTION
1. Disconnect the negative battery cable.
2. Remove the column cover. See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair
3. Remove the light switch. See: Headlamp/Headlamp Switch/Service and Repair
4. Verify that the continuity between the front fog light switch terminals is as indicated in the table using a circuit tester.
-
If not as indicated in the table, replace the light switch.
