6 V6-3.7L (2009)
Headlamp Control Module: Service and Repair
Auto Light-Off Control Module Removal/Installation
AUTO LIGHT-OFF CONTROL MODULE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the dashboard under cover (Driver side). See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Dashboard Under Cover Removal/Installation
3. Remove the nut.
4. Disconnect the connectors.
5. Remove the auto light-off control module.
6. Install in the reverse order of removal.