6 V6-3.7L (2009)
Turn Signal Bulb: Service and Repair
Rear Turn Light Bulb Removal/Installation
REAR TURN LIGHT BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the trunk end trim. See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Trunk End Trim Removal/Installation
3. Partially peel back the trunk side trim.
4. Disconnect the connectors shown in the figure.
5. Rotate the rear turn light socket in the direction of the arrow shown in the figure and remove it.
6. Remove the rear turn light bulb.
7. Install in the reverse order of removal.
