mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Engine Oil|Specifications > < Engine - Oil Level Inspection Precautions
Page 1
background image

Engine Oil: Technical Service Bulletins
Engine - Oil Level Service Caution

Bulletin No.: 01-044/08

Last Issued: 9/5/2008

Subject:
3.5L/3.7L - ENGINE OIL LEVEL SERVICE CAUTION 

APPLICABLE MODEL(S)/VINS
2007-2009 CX-9
2009 MAZDA6 with 3.7L V6

DESCRIPTION

When inspecting the engine oil level on the dipstick (A) of 2007-2009 CX-9 or 2009 Mazda6 vehicles equipped with 3.5L/3.7L engines, it is important
to understand that the oil is full when it reaches the upper portion of the cross hatched area (B). Filling until the oil level reaches the upper dot above the
cross hatched area (C) could result in oil overfill and aeration of the oil. Due to the 3.5L/3.7L engines internal design, it takes longer for all the oil to
drain back to the oil pan after the engine is shut off than other Mazda engines.

During a service such as an oil change or engine replacement, after filling the engine with the correct amount of oil (depending on the service) and
running the engine to circulate the oil, wait approximately 5 minutes to ensure the oil level indicated is at the correct level and top-off as necessary.

ENGINE OIL CAPACITY

Disclaimer

Engine Oil|Specifications > < Engine - Oil Level Inspection Precautions