6 V6-3.7L (2009)
-
If the ATF level is out of the range, adjust the ATF to the specification.
ATF type
-
ATF M-V
2. Inspect the ATF level after driving the vehicle.
a. Select the selector lever and pause momentarily in each position/range (from P position to D range) while depressing the brake pedal.
b. Drive on city roads at a minimum of 5 km {3 mile}.
c. Connect the M-MDS to the DLC-2.
d. Verify that the ATF temperature is 60-70 °C {140-158 °F} using the M-MDS.
e. Remove the dipstick and wipe it clean while the engine is idling.
f.
Verify that the ATF level is in the range as shown in the figure.
-
If the ATF level is out of the range, adjust the ATF to the specification.
ATF type
-
ATF M-V
