6 V6-3.7L (2009)
Wheel Unit Component Removal Note
1. Set the bead breaker at the position laterally opposed to the valve.
2. Break the bead loose.
CAUTION:
-
Do not break the bead loose within the range of 45° on each side of the valve. Otherwise, the wheel unit could be damaged.
3. Break the bead loose on the other side of the wheel.
CAUTION:
-
Set the bead breaker at the position laterally opposed to the valve.
-
Do not break the bead loose within the range of 45° on each side of the valve. Otherwise, the wheel unit could be damaged.
4. Insert the tire lever at the point 40 mm {1.6 in} from the wheel unit in the direction that the tire changer turntable rotates.
