mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Vehicle Lifting|Service and Repair|Page 1583 > < TPMS Reset After Tire Rotation or Flat Repair|Page 1578
Page 1
background image

Vehicle Lifting: Service and Repair

JACKING POSITIONS, VEHICLE LIFT (2 SUPPORTS) AND SAFETY STAND (RIGID RACK) POSITIONS

Jacking Positions

WARNING:

-

Improperly jacking a vehicle is dangerous. The vehicle can slip off the jack and cause serious injury. Use only the correct front and rear jacking
points and block the wheels.

-

Use safety stands to support the vehicle after it has been lifted.

Front

NOTE:

-

To prevent obstruction between the jack body and front bumper when the jack body is inserted, use a low-floor type jack.

-

Near the center of the front crossmember.

Rear

-

Near the center of the rear crossmember.

Vehicle Lift Positions, Safety Stand Positions

Front and rear

WARNING:

-

Lifting a vehicle that is not stabilized is dangerous. The vehicle can slip off the lift and cause serious injury and/or vehicle damage. Make sure that
the vehicle is on the lift horizontally by adjusting the height of the support at the end of the arm of the lift.

-

Both sides of the vehicle, on side sills.

Vehicle Lifting|Service and Repair|Page 1583 > < TPMS Reset After Tire Rotation or Flat Repair|Page 1578