6 V6-3.7L (2009)
c. Remove the outer housing from the the inner housing.
d. Pry and bend the metal tabs upward on both sides of the inner housing using a small flat screwdriver, then remove the accessory power plug /
charger from the inner housing.
NOTE:
Discard the original accessory socket.
5. Install the cover onto a new accessory socket, then install the accessory socket in the vehicle. Refer to MS3 online instruction section 09-20.
6. Verify repair, and return accessory power plug I charger to customer.
PART(S) INFORMATION
WARRANTY INFORMATION