6 V6-3.7L (2009)
Body Control Module: Programming and Relearning
CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE
NOTE:
-
Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PERSONALIZATION FEATURES SETTING PROCEDURE.
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
-
Select the "Module Programming"
3. Then, select items from the screen menu in the following order.
-
Select "Programmable Parameters"
-
Select "BCM / GEM"
4. Select the item name, and then select option.