6 V6-3.7L (2009)
Camshaft Position Sensor: Testing and Inspection
CAMSHAFT POSITION (CMP) SENSOR INSPECTION [MZI-3.7]
Visual Inspection
1. Remove the CMP sensor. See: Service and Repair
2. Verify that there are no metal shavings on the CMP sensor.
-
If it is a malfunction, replace the CMP sensor. See: Service and Repair
Resistance Inspection
1. Remove the CMP sensor connector.
2. Measure the resistance between the CMP sensor terminals.
-
If not within the specification, replace the CMP sensor. See: Service and Repair
CMP sensor resistance
-
800-1,320 ohms [18-28 °C {64.4-82.4 °F}]