6 V6-3.7L (2009)
Throttle Position Sensor: Testing and Inspection
THROTTLE POSITION (TP) SENSOR INSPECTION [MZI-3.7]
Sensor Output Value Inspection
1. Verify that no DTC related to APP sensor has been detected.
-
If any DTCs related to APP sensor have been detected, perform the DTC inspection. See: Testing and Inspection/Diagnostic Trouble Code
Descriptions/DTC Table [Engine]
2. Switch the ignition to ON.
3. Inspect the following items using the PID/DATA monitor function. See: Testing and Inspection/Mode 6 Data/Diagnostic Monitoring Test Results
-
Verify that the sensor output value is as indicated in the table below according to the condition of the accelerator pedal.
-
TP1
-
TP2
Specification
-
If it cannot be verified, replace the throttle body. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair