mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Emissions - Engine Compartment Ticking Noise|Page 2812 > < Emissions - Engine Compartment Ticking Noise|Page 2806
Page 1
background image

Technical Service Bulletin # 0101809

Date: 090605

Emissions - Engine Compartment Ticking Noise

Bulletin No: 01-018/09

Last Issued: 06/05/2009

Subject:
PURGE VALVE CONTACT/HARD RATTLE NOISE

BULLETIN NOTE

APPLICABLE MODEL(S) / VINS
2009 MAZDA6 3.7L vehicles built before Oct. 17, 2008

DESCRIPTION

Some vehicles may experience a rattle or a loud tick noise from the engine compartment during purge valve operation (the noise is loudest during
30%-60% duty cycle). This may be a hard contact noise caused by misalignment of the purge valve, rubber grommets, or attaching hoses forcing contact
with the PCM, PCM bracket, metal bracket or an excessive valve tick noise.

Customers having this concern should have their vehicle repaired using the repair procedure shown in this bulletin.

PART(S) INFORMATION

WARRANTY INFORMATION

NOTE:

^ This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.

^ This repair will be covered under Mazda's New Vehicle Limited Warranty term.

Emissions - Engine Compartment Ticking Noise|Page 2812 > < Emissions - Engine Compartment Ticking Noise|Page 2806