6 V6-3.7L (2009)
Evaporative Emissions Air Separator: Testing and Inspection
EVAPORATIVE CHAMBER INSPECTION [MZI-3.7]
1. Remove the evaporative chamber. See: Service and Repair
2. Plug the port C.
3. Verify that there is air flow from port B when pressure is applied to port A.
-
If there is no airflow, replace the evaporative chamber. See: Service and Repair
4. Remove the plug of port C.
5. Plug the port B.
6. Verify that there is air flow from port C when pressure is applied to port A.
-
If there is no airflow, replace the evaporative chamber. See: Service and Repair
7. Remove the plug of port B.
8. Verify that there is air flow when vacuum is applied to port A.
-
If there is no airflow, replace the evaporative chamber. See: Service and Repair
