mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Before Service Precaution|Page 2919 > < Fuel Filler Cap|Testing and Inspection|Page 2913
Page 1
background image

Fuel Pressure Release: Service Precautions
Before Service Precaution

BEFORE SERVICE PRECAUTION [MZI-3.7]

WARNING:

-

Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.

-

Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To
prevent this, always complete the following "Fuel Line Safety Procedure".

-

A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before performing work on the fuel
system, discharge static electricity by touching the vehicle body.

Fuel Line Safety Procedure

1. Disconnect the negative battery cable.

2. Remove the fuel-filler cap to release the pressure inside the fuel tank.

3. Disconnect the fuel pump unit connector.  See: Fuel Pump/Service and Repair/Removal and Replacement

4. Connect the negative battery cable.  See: Starting and Charging/Battery/Service and Repair/Removal and Replacement

5. Start the engine.

6. After the engine stalls, crank the engine several times.

7. Switch the ignition to off.

8. Connect the fuel pump unit connector.

Before Service Precaution|Page 2919 > < Fuel Filler Cap|Testing and Inspection|Page 2913