6 V6-3.7L (2009)
Knock Sensor: Service and Repair
KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZI-3.7]
NOTE:
-
Put a tray under the converter housing to receive the engine coolant.
1. Disconnect the negative battery cable.
2. Remove the following part for easier access.
-
Complete the "BEFORE SERVICE PRECAUTION". See: Fuel Delivery and Air Induction/Service Precautions/Vehicle Damage
Warnings/Before Service Precaution
-
Remove the engine cover. See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Cover
Removal/Installation
-
Remove the ventilation hose. See: Emission Control Systems/Service and Repair
-
Remove the TP sensor connector. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
-
Remove the vacuum hose (to purge solenoid valve). See: Emission Control Systems/Service and Repair
-
Remove the vacuum hose (to master back). See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
-
Remove the dynamic chamber. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
-
Remove the fuel hose. See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Quick Release Connector
Removal/Installation
-
Remove the fuel distributor. See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair
-
Remove the intake manifold. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
3. Remove in the order indicated in the table.
